If you own a Eufy Robovac and observe that it’s been sounding a bit too loud from the past few days then you should know how to fix Eufy Robovac making loud noise so that the vacuum may last longer!!
Many of the Eufy Robovac users are found to be reporting that their vacuum cleaner is making loud noises whenever they try to operate it! There can be a number of reasons for this, to know what are the ones creating these noises and how to fix Eufy Robovac making loud noise, follow us throughout the guide.
To fix Eufy Robovac making loud noise: Adjust to Standard Suction, clean the wheels, remove the dust collector, remove brush guard, run the vacuum on hard floors, etc. Find the rest of the fixes in the below sections!
This article will help you gain knowledge on how to fix Eufy Robovac making loud noise, as there are a number of fixes explained below for the same!! If you hold interest in knowing the same then start reading without delaying any minute more!!
How To Fix Eufy Robovac Making Loud Noise?
There are chances that your Eufy Robovac may start giving you signs to repair its systems. One of such signs can be the loud voice coming out of the machine every time you try to clean! There can be a number of reasons behind your Eufy Robovac releasing this rattling sound from itself. An Eufy Robovac makes such noises while cleaning because the rolling brush bearings might get bulked up with hair or the side motors might be entirely worn down. To know how to fix Eufy Robovac making loud noise you need to do as the below instructions says!! Follow each one of them and get rid of the noisy sound coming out of your Eufy Robovac!!
- Extract the hair from the brush bearings and clean the bearings properly.
- To avoid such noise, you need to replace the side brush motors as they might get tattered.
- Adjust the vacuum to Standard Suction mode from Max Suction mode and then try cleaning.
- Adjust and roll the vacuum wheels to see if there are rough or harsh particles left inside. Also clean the wheels.
- Make sure the mopping module is installed properly as it can also be the reason why Eufy Robovac is ejecting loud noises.
- Extract the dust collector out and clean the suction inlet. Also make sure that the filter is dry and is installed in the proper manner.
- Remove the dust collector, hold the vacuum upside down and put the suction hole downwards and shake out to see if there is any debris particle stuck in the suction fans in the vacuum.
- Detach the brush guards and rolling brushes to clean them along with the roller joints and the joints on the vacuum.
- Try using the vacuum on hard floors without the roller brushes and brush guard on to see if it’s still imparting noise without these two parts.
NOTE: If the machine works fine without these two parts on, then consider that the vacuum is alright and the problem lies in these two parts. Maybe roller brushes and brush guard might not be installed properly or the rolling brush connector might be shabby or just need to be replaced, or the rubber on the brush guard might be broken.
If you find any of the above cases true to your Eufy Robovac then you can replace these parts:
- L70 Hybrid Rolling Brush
- L70 Hybrid Replacement Brush Guard
- L70 Hybrid Replacement Kit
And these were the effective fixes that one can try out for how to fix Eufy Robovac making loud noise. In case, the problem persists even after following all of the above mentioned fixes then you can contact Eufy Customer Support and share your concern to get it resolved.
Wrapping Up
If your Eufy Robovac isn’t working as it used to do in its initial stages and is now emitting loud noises whenever you try to clean then there might be a few common reasons possible for this like Eufy Robovac’s wheels/rolling brush/suction inlet are stuck due to debris collection. In such cases you need to make sure that your vacuum is cleaned periodically. Just like this, a brush guard and mopping module can also be responsible for imparting noise. To know how to fix Eufy Robovac making loud noise you can refer to the above mentioned fixes and get rid of this issue.
Frequently Asked Questions
Q. Why Is My Robot Vacuum Making A Loud Noise?
There can be a number of reasons for this like the side brush motors have stripped gears, the rolling brush bearings are full of hair, the rolling brush and brush guard aren’t installed properly, the suction inlet is clogged, or extractors are rubbing together.
Q. Why Is My Vacuum Roller Brush Making A Loud Noise?
There might be a few common reasons possible for this like Eufy Robovac’s wheels/rolling brush/suction inlet being stuck due to debris collection.
Q. How Long Does A Eufy Robovac Lasts?
Eufy Robovac 11 can last up to 100 minutes and take around 5-6 hours to get fully charged.
Q. Can You Over Charge Eufy Robovac?
One can put Robovac on the charging base doesn’t matter it it’s fully charged. The battery protection circuit saves the battery from being overcharged. After being fully charged, the machine will stop drawing poer at its end.
