How To Fix Oculus Quest Black Screen | 7 Ways To Fix It!

Oculus Quest Black Screen

Several Oculus Quest users have reported black screen issues with their headsets. There are several causes of this issue. If you are too stuck due to this issue, then here is a post for you. In this post, we will cover the Oculus Quest black screen.

Oculus Quest is lightweight, comfortable, and powerful enough to run impressively detailed virtual reality experiences, the Oculus Quest 2 is the best VR headset that Oculus has made so far. And, depending on your perspective on raw power versus portability and comfort, it might just be the best VR headset ever.

We will be providing the users with the best VR headsets with the fixes that will solve their Oculus Quest black screen problem. You can try each one of the fixes and see which one of them works fine for you. So, without wasting time, let’s start.

Oculus Quest Black Screen Causes

A few issues can cause the Oculus Quest black screen error. If the batteries are dead or don’t have a sufficient level of charge, that can prevent the headset from turning on. Stuck or interrupted firmware updates can also result in a black screen. If the firmware is corrupt, or the hardware itself is damaged, that can also cause a similar black screen problem.

How To Fix The Oculus Quest Black Screen?

How To Fix The Oculus Quest Black Screen?

1. Keep The Headset Charged

Oculus Quest black screen issue is caused if the headset battery is low or dead. Keep the headset on charge for some time, then check if the issue has been solved.

Related Oculus Quest 2 Battery Life | Ways To Improve Battery Life 

2. Open Oculus Menu

If your headset is charged and the black screen continues on the display, then try opening the Oculus menu. Try pressing the menu button on your left controller and the Oculus button on the right controller. If this gives you access to the menu, try opening an app to see if that fixes the black screen problem.

3. Check Oculus App

Load the Oculus App on your smartphone. Check if it sees your headset and tries launching a game from the app. If the game launched successfully, then put on your headset and check if the black screen problem has been resolved.

4. Keep The Headset Plugged In And Power On

Keep the headset on charge for at least 30 minutes.  If the headset is attempting to update, then leaving it alone while plugged into power may allow it to finish the update and return to regular operation.

Related How To Play Roblox on Oculus Quest 2 Wirelessly?

5. Check The Proximity Sensor

Check the proximity sensor. Between the lenses in your headset, you’ll find a small proximity sensor. Try covering the sensor with your thumb to see if the black screen goes away. If that doesn’t work, try cleaning the sensor with a dry microfiber cloth.

6. Hard Reboot

If none of the above fixes are working, then you can go for a hard reboot. If pressing the power button results in a black screen, press and hold the power button for at least 10 seconds. Holding the power button down will cause the Oculus Quest to undergo a hard reboot, which can fix many issues like the black screen of death.

Boot using the bootloader menu. If you can’t perform a hard reboot with just the power button, try performing a hard reboot from the bootloader menu.

  1. Press and hold the volume down and power buttons for at least 10 seconds.
  2. Highlight the boot device using the volume buttons.
  3. Press the power button to hard reboot your Quest.

Related How To Play Roblox On Oculus Quest 2 Without A PC

7. Perform Factory Reset

Perform Factory Reset

If a hard reboot can’t solve the problem, then the only way remains is a factory reset. Doing this is an extreme measure, as it removes all of your data from the headset and returns it to an original factory state. Make sure you’ve exhausted all of your other options before attempting this fix. You will need to re-download everything, and you will lose all of your saved data.

  1. Press and hold the volume down button and power button for at least 10 seconds.
  2. Highlight Factory Reset using the volume buttons.
  3. Press the power button.

Related How To Pair Oculus Quest 2 To Phone | Pair Multiple Devices At A Time

Wrapping Up:

We have provided 7 ways to fix the Oculus Quest black screen. We hope any one of the fixes will solve your issue. Factory reset is an extreme fix. Use this fix only when all other ways didn’t work for you.

Keep exploring our website to know more about Oculus Quest headsets.

Frequently Asked Questions

Q1. What Do I Do If My Oculus Quest 2 Has A Black Screen?

Try to Unplug and Plug the VR headset one time, this can also fix any of the screen glitches if there. Wait some seconds after unplugging the headset cable. Insert the cord as well as the facial interface back again in the headset. If that won’t work, then perform a hard reset.

Q2. Why Is My VR Headset Black?

The PSVR headset can be stuck at a black screen for a few reasons: The headset is turned off. The headset was turned off and back on while out of view of the PS4 Camera. The in-game recalibrate option was used, but the front of the PSVR headset wasn’t completely in view of the camera.

Q3. How Do I Troubleshoot The Black Screen Of Death?

Repair a Black Screen of Death in Safe Mode

  1. Click Advanced options then Troubleshoot.
  2. From here go to Advanced options > Startup Settings > Restart.
  3. Select option 4, Enable Safe Mode.
  4. Wait for Windows Safe Mode to start.
  5. Once booted, press Windows + X.
  6. In the Quick Link, menu select Device Manager.

Leave a Comment

Your email address will not be published.

Scroll to Top