How To Get Water Out Of Charging Port? In 4 Simple Ways!

How To Get Water Out Of Charging Port

Our phone’s charging port is the most sensitive part of our phone. It is also the exposed part of our phone. Most often it gets damaged by water. In this post, we will cover how to get water out of charging port.

We often use our phones under all conditions. Sometimes, it is raining or humid. This makes our charging port wet. The problem with getting the charging port wet will damage the port. If your port gets damaged, then you can no longer charge your phone and even some worst cases happen if your port gets damaged.

We will be covering more on how to get water out of charging port. We will guide you step-by-step on this and we will also check the causes of water damage and how to prevent it. So, without wasting time, let’s start

How To Get Water Out Of Charging Port

How To Get Water Out Of Charging Port

Here is a step-by-step guide on how to get water out of charging port.

Why Do Phones Get Hot When Charging?
  1. Immediately dry the exterior of the device with a dry cloth or microfiber towel.
  2. Gently shake or tap the device with the port side down to remove larger droplets of water from the port.
  3. Lay the device flat, display-side down, in a well-ventilated area, and allow it to dry naturally.
  4. Depending on the extent of the moisture in the port, this may take anywhere from 30 minutes to a few hours.

What Are The Causes Of Water Damage?

Having understood the steps on How to get water out of charging port. Here are some prime causes of water damage that can damage your charging port.

  1. Submersion: 

If you submerged your phone in water, the water will invade all openings in the device.

  1. Humidity: 

In regions where the humidity level, or the amount of moisture in the air, is high, the moisture can condense on the device and get into the charging port. This includes steamy environments such as saunas or hot showers.

  1. Rain: 

Rain can enter your device in more ways than just by direct exposure. Try not to use your phone in the rain or snow.

  1. Sweat:

Devices can be exposed to moisture through sweat by running down headphone wires or by being kept in a sweaty or moist environment such as being an exercise belt on your waist or arm.

Related: How To Screenshot On iPhone 12 Pro Max? Few Ways To Do It!!

What Are The Precautions To Be Taken?

Now that you know how to get water out of charging port. If your charging port got wet, then avoid these things to prevent the port from damaging.

  1. Don’t blow air into the port. 

Blowing air into the port can actually cause the moisture to creep further into the device. Compressed air also has the potential to increase the amount of moisture in the port due to how cold compressed air is when it is sprayed. The cold air condenses and creates moisture.

  1. Don’t use heat. 

While many devices are heat resistant to a certain extent, some components such as the screen, battery, and seals are more sensitive to heat. Using heat to dry water in the port can damage the port and device components so stay away from hair dryers and ovens.

  1. Don’t stick anything into the port. 

This includes cotton swabs, paper towels, tissues, or anything else that will fit. Pushing something into the port can either leave debris behind or damage the connection points in the charging port.

  1. Don’t place your device in a bag of rice. 

Rice has been the holy grail of removing moisture from devices and is so universally accepted that it can be seen on commercials and television shows. This method, however sound in concept, can cause more damage. While rice does absorb moisture, it also leaves fine debris behind which can damage your phone.

  1. Don’t use isopropyl alcohol. 

Isopropyl alcohol is diluted with water so you would be adding even more moisture to the device. Also, isopropyl alcohol is highly conductive and can transfer electrical charges created by the device.

How To Know If Your Charging Port Is Wet?

Both Apple and Android devices are equipped with moisture sensors that will notify you if there is moisture found in the charging port when a charger or supplemental attachment is connected to the device. Above we told you how to get water out of charging point, now we will be filling you in with how to know if your charging point is Wet?

Apple devices will display “Charging not available: Liquid has been detected in the Lightning connector” when a charger is plugged into the wet device or “Liquid detected in the Lightning connector: Disconnect to allow the connector to dry” if a non-power device such as a headset is connected.

Android devices display a similar message, “Disconnect cable: Moisture has been detected,” or, “Unplug Charger: Moisture has been detected,” when attempts are made to plug a charger or supplemental device into a wet Android device. These sensors are only available on the latest devices. If you are using an old device and waiting for fo it to sense, then it is better to pray that your post is not damaged.

How Do You Know If Your Charging Is Damaged With Water

  • Your device will not power on. The prime cause is your phone is suffering from water damage.
  • The device is getting hot. When a lithium-ion battery suffers from damage such as water damage, it can get extremely hot.
  • Applications won’t load or stay on. If your device is not loading applications or if applications such as the flashlight remain on despite attempts to turn them off, you may have water damage.
  • The speakers don’t work. Speakers that will not produce sound or microphones that do not pick up sound may be suffering from water damage.
  • There is fog under the screen. Fog or water droplets underneath the screen indicate that moisture has built up within the device.
  • The device doesn’t recognize the SIM card or doesn’t have service. A device with water damage may not be able to read the SIM card or be able to connect to the cellular network.

Related: How To Turn Off iPhone 12 Pro Max | Try Out These 3 Ways!

Wrapping Up

Here we conclude our post on how to get water out of charging port. We have provided you with all the important information that you need to know. Water damage can happen at any time to your device, so it is important to remember the process of how to get water out of it.

Keep exploring our website to learn more about tips and tricks.

Frequently Asked Questions

Q1. How Can I Dry My Phone Without Rice?

Drying your phone with rice is not recommendable.

  1. Remove from water as soon as possible.
  2. Power down your phone and remove all removable components.
  3. Dry the phone with a lint-free cloth and vacuum (if available).
  4. Purchase crystal (silica) cat litter or desiccant packets (also silica).
  5. If unavailable, try instant oatmeal or instant couscous.

Q2. How Long Will It Take For A Phone To Dry Out?

You want to give it 48 hours or more, but at least leave it overnight if you can. While some phones won’t be revived no matter how long they sit in rice, the longer the better

Put the rice and phone under a desk lamp or similar mild heat source to encourage the evaporation process. Give it as long as you can.

Q3. Can I Charge My Phone After It Fell In Water?

If your iPhone has been exposed to liquid, unplug all cables and do not charge your device until it’s completely dry. Using accessories or charging when wet might damage your iPhone. Allow at least 5 hours before charging with a Lightning cable or connecting a Lightning accessory.

Leave a Comment

Your email address will not be published.

Scroll to Top