How to View the Coordinates in Minecraft? In 5 Ways!

How to View the Coordinates in Minecraft

Minecraft is one of the most popular video games that makes gamers crazy busy. Minecraft is a vast land where you can do a lot of things, from making potions to breeding turtles, possibilities are immense. Learning coordinates in Minecraft is important for a lot of reasons. 

The user’s location on the map is indicated using coordinates in Minecraft. Three are the X, Y, and Z coordinates. The X coordinate shows the user’s position on the East and West edges of the map, indicating how far east or west they are from their starting point. Similar to how the Y and Z coordinates denote up and down and north and south, respectively, are the corresponding coordinates.

Hence if you are a novice, it’s time to learn about coordinates in Minecraft and step forward to become a pro gamer. 

How To Track A GPS Device?
How To Track A GPS Device?

Why Do You Need to Know about Coordinates in Minecraft?

The Minecraft universe is vast. Technically speaking, it is practically indefinitely large (at least in Bedrock Edition), as the world is created at random as the user explores it. There is a lot of walking to be done, but you can also fly through the air and dig beneath the surface.

Realistic object creation in Minecraft is fairly common, and there are plenty of outstanding examples available, like making a water elevator or a custom-colored bed. But in the world of Minecraft, they would be difficult to design and carry out without accurate coordinates.

Minecraft uses a coordinate system to keep track of your location in the world. The debug panel in the PC versions of Minecraft conceals these coordinates. If you’re using a console, open your Map and you’ll see the coordinates.

The ABC of Coordinates in Minecraft

Minecraft features three coordinates: X, Y, and Z, much like any other three-dimensional space. You can use these three to precisely locate any specific block or item in the Minecraft universe. All you need to know about X, Y, and Z coordinates:

X coordinate: On the map, your East/West position is determined by the X coordinate. If the value is positive, it indicates that the location is East of the map’s center. Position in the West is determined by the negative value.

Y coordinate: On the map, your vertical location is determined by the Y coordinate. The positive value will rise the further you climb upward. On the other hand, the value drops the deeper you go, the closer you get to bedrock. The sea always equals Y=64.

Also, you need to know about two coordinate positions:

Absolute coordinate Position: In Minecraft, the absolute coordinate designates a particular position. If you have the numbers 35, 139, 58; then it indicates a specific location, which is 35 blocks to the East, 139 blocks above sea level, and 58 blocks South of the center of the map.

Relative coordinate Position: The relative coordinate in Minecraft indicates the distance from a specific point. There is a “~” in the format (tilde symbol). When you see a number like “3, 1, 2,” it means that the location is 3 blocks east, 1 block up, and 2 blocks south of where you are right now.

5 ways to Find Your Coordinates in Minecraft

1. Find Coordinates in Minecraft – Bedrock Edition

View the Coordinates in Minecraft_Bedrock

While using Windows 10 or 11, macOS, and Linux to play Minecraft Bedrock Edition, it is quite simple to determine your current coordinates. This is the procedure.

  1. The “Settings” menu should appear.
  2. Choose “Game.”
  3. Turn on the “Show Coordinates” option by descending and scrolling down.

Up until you turn the option off, your current coordinates are visible in the top left corner of the screen. They will alter as you go, which makes them quite helpful for orders and navigation.

2. Find Coordinates in Minecraft – Java Edition

View the Coordinates in Minecraft_Bedrock_Java

Unfortunately, unlike Bedrock, Minecraft Java Edition does not have a built-in setting to display only your coordinates. Finding your current coordinates is still a very simple process if you know. Here is what to do.

Simply hit “F3” on Windows or “FN + F3” on Mac to bring up the “Debug Screen,” which is populated with a variety of text information about the game world, while you are playing Minecraft Java game.

The “XYZ:” and “Block” parts should be found. You will see the block you are standing on, such as “Block: 56- 82 -153,” as well as your specific coordinates (where your feet are resting). 

3. Find Coordinates in Minecraft – PC/Mac

View the Coordinates in Minecraft_Bedrock_Java_PC_Mac

Activate the complete debug screen. The debug information has been scaled back by default in more recent versions. From the Options menu, you may turn on the complete debug screen.

Choose “Chat Settings” from the Options menu after it is open. “Reduced Debug Info” must be disabled.

Select Debug from the menu. This will show the readout of Minecraft debug information. F3 is normally the key, though your computer may use a different one:

  1. The debug panel is accessible on desktop PCs by hitting the F3 key.
  2. You must press Fn+F3 on various laptops and Mac PCs.
  3. You must press Alt+Fn+F3 newer on Mac systems.

In the debug screen, locate the coordinates. On the debug readout, there is a great deal of information can be seen. The labels for the primary coordinates are “Block” and “XYZ,” respectively. Additionally, you’ll see a “Facing” entry that indicates the direction you are presently facing.

Make sense of the coordinates. The building that serves as the foundation for your Minecraft world determines where you are. The three coordinate numbers (XYZ) are shown in the “Block” element without any labels.

  1. Your position relative to the beginning block is indicated by the letter “X” (longitude).
  2. Your position is “Y” either above or below the starting line (elevation).
  3. Your position north or south of your beginning block is indicated by the letter “Z.” (Latitude).

Watch the “Block” values alter as you move. begin to move about. As you go, you’ll notice that these numbers alter. You will better understand the coordinate system after reading this. You are west of the starting line if the “X” value is negative. If “Z” is negative, you are moving north of the beginning line.

Since this is the sea level, your beginning location’s Y value will often be around 63 even though you usually start at X,Z:0,0.

Related: How To Install Minecraft On Chromebook With Easy Peasy Steps?

4. Find Coordinates in Minecraft – PE

View the Coordinates in Minecraft_Bedrock_PE

If you’re playing in a survival universe, enable cheats. Cheats are enabled by default if you’re playing in a Creative world, and you can move on to the next phase In your current Survival world, activate cheats by:

  1. Activate the Worlds menu.
  2. Next to the name of your world, tap the pencil.
  3. Adjust the “Activate Cheats” switch so that it is in the on (blue or green) position.
  4. If you proceed, a pop-up will warn you that your achievements in this world will be permanently disabled. Tap Continue if you agree with this because it is necessary to enable cheats.
  5. If you wish to view your coordinates, go back to that spot in your world.

Tap the conversation icon. At the top of the screen, there is a chat bubble icon.

In the chat window, enter “/tp ~ ~ ~” and then press return. You can view your coordinates by using this command, which will transfer you to your current location. The bottom-left corner of the screen will display the coordinates.

The three coordinates are X, Y, and Z, in that order.

  1. Your longitude is “X.” You are east of your starting block if X is a positive number. The west is where you are if X is negative.
  2. Your elevation is “Y.” 0 is the bedrock, while 63 is the sea level.
  3. Your latitude is “Z.” You’re south of the starting line block if Z is positive. You’re north of the starting block if Z is negative.

In Minecraft, coordinates are frequently used for the following purposes:

  1. To another place, teleport.
  2. Place blocks that were copied elsewhere.
  3. Place new blocks or objects in the designated area.
  4. Based on the coordinates, clear the world.
  5. For the purposes of teleportation, note down certain locations in the world.
  6. Create new entities in designated locations.
  7. Your warp location is set.
  8. Create passageways from one place to another.
  9. To duplicate buildings and other sectional portions of the world, use structure blocks.
  10. Share particular locations with other users within the same universe.

Related: 5+ Best Minecraft Skin Creators for the Pro Players To Play In 2022

Wrapping Up: 

Now that you have the know-how about coordinates in Minecraft, it’s time to explore this amazing place. It’s time to dare the tasks, create portals, and do more amazing things that you can build only in your imagination. 

Next, learn more about Minecraft Errors and Minecraft NFTs. Have a question? Let us know in the comment box! 

FAQs

Q1. How do you see your coordinates in Minecraft without F3?

You can rebind a key or key combination to F3 using third-party software. If you’re using Windows, you also have the Windows on-screen keyboard as an option. If there is a “minimap mod” available for the version of MC you’re playing, you can install it. Typically, they display coordinates.

Q2. Why does nothing happen when I press F3 in Minecraft?

It appears that your keyboard’s F3 key might be damaged. To check, launch Internet Explorer or Chrome and hit F3. This should bring up the “search this page” box at the top of the page. similar to pressing CTRL + F.

Q3. How do you open coordinates in Minecraft Windows?

To display the game information on the left side of your screen, press Fn + F3. You may get the coordinates for the block to verify from the details, and the middle number indicates your current location. These two shortcut keys can be used to find the coordinates in the same way.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top